1M系列钮子开关选型指引
发布时间:2012-02-15 18:52:42| □□□□ | □□ | □□□ | □□□ | □ | □ | □ | ||||||
| | | | | | | | | | | | | | | ||||||
| 机种型号/开关功能 | 操作柄类型 | 衬套类型 | 端子类型 | 触点材质 | 封胶类型 | ROHS/环保 | ||||||
| | | | | | | | | | | | | | | ||||||
| 1MS1 SP On-On 1MS2 SP On-(On) 1MS3 SP On-Off-On 1MS4 SP (On)-Off-(On) 1MS5 SP On-Off-Morn 1MD1 DP On-On 1MD2 DP On-(On) 1MD3 DP On-Off-On 1MD4 DP (On)-Off-(On) 1MD5 DP On-Off-(On) 1MD6 DP On-On-On 1MD7 DP (On)-On-(On) 1MD8 DP On-On-(On) 1M31 3P On-On 1M32 3P On-(On) 1M33 3P On-Off-On 1M34 3P (On)-Off-(On) 1M35 3P On-Off-(On) 1M41 4P On-On 1M42 4P On-(On) 1M43 4P On-Off-On 1M44 4P (On)-Off-(On) 1M45 4P On-Off-(On) 1M46 4P On-On-On 1M47 4P (On)-On-(On) 1M48 4P On-On-(On) 产品类型： 基本型钮子开关 |
T1 10.41mm T2 5.08mm T3 13.97mm T4 16.26mm T5 21.34mm T6 扁柄,防钮转,12.30mm T61 扁柄,防钮转,21.0mm T62 带帽子手柄,13.49mm T63 扁柄,防钮转,6.35mm T7 12.37mm,15/32螺牙衬套 T8 17.56mm,15/32螺牙衬套 T9 塑胶柄,21.3mm TA 26.30mm,黑色塑胶手柄, 15/32螺牙衬套 T11 塑胶手柄,12.2mm TL1 带锁(防误操作),16.00mm TL2 带锁(防误操作),16.26mm TL3 带锁(防误操作),17.28mm |
B1 8.89mm,键槽(标准螺牙) B2 8.89mm,键槽(不带螺牙) B3 7.10mm,键槽(带螺牙) B4 7.10mm,键槽(不带螺牙) B5 7.52mm,切面(高扭力) B6 8.00mm,切面(高扭力) B7 8.89mm,切面(标准螺牙) B8 8.89mm,键槽(公制螺牙) B9 7.52mm,切面(防泼溅) B11 7.55mm,键槽(标准螺牙) B12 7.55mm,键槽(不带螺牙) B13 11.38mm,键槽(15/32) B14 11.90mm,切面(防泼溅) B15 7.55mm,切面(标准螺牙) B16 7.55mm,切面(不带螺牙) B17 3.50mm,键槽(带螺牙) B18 11.38mm,键槽(15/32螺牙) B20 11.38mm,键槽(15/32螺牙) B25 8.00mm,键槽,带锁手柄(带螺牙) B26 8.00mm,键槽,带锁手柄(不带螺牙) |
M1 焊接端子 M2 PC通孔 M3 快带连接端子 M5-1 18.70mm, M5-2 24.20mm, 绕线 M5-3 10.55mm, 绕线 M5-4 26.97mm, 绕线 M6 直角, PC通孔 M6N 直角,嵌入式, PC通孔 M7 垂直直角, PC通孔 VS2 11.68mm, V型支架 V2N 11.68mm, 嵌入式，V型支架 VS3 16.00mm, V型支架 VS4 11.68mm, V型支架 VS5 16.00mm, V型支架 |
Q 银 R 金 G 金,纯锡 S 银,纯锡 C 金包银 K 金包银,纯锡 |
E 环氧树酯 | □ ROHS S ROHS+无铅 F ROHS+无卤 |
注：SP=SINGLE POLE单极 DP=DOUBLE POLE双极 3P=3极 4P=4极 ON=开(闭合) OFF=关(断开) ( )=瞬间复位
上一篇:发展历程
下一篇:1M系列钮子开关功能